FlytrapCare Carnivorous Plant Forums

Being new to the forum if I have this in the wrong place please advise.

But, I had two small cracks (holes) in the container I use to hold water and my pots in. I used black silicone sealant to close these two small holes. While it keeps the water in very nicely it got me thinking: Is this sealant bad for my VFTs?

Thoughts?

Sent from my SM-G965U using Tapatalk

It must say "aquarium safe" somewhere on the tube. Or check the specs of the brand online...

If it's 100% silicone it will be fine for your plants as long as it is allowed to cure properly before exposing it to water, usually 24 hours. Silicone cures by exposure to oxygen, obviously can't do that underwater, and some form of solvent evaporation. Exposure to water before a full cure can result in failure of the seal and the leaching of chemicals into the water.
All that being said, if you wait at least 12 hours after applying it to a clean and dry surface, you'll be fine with it sealing the crack, and the amount of chemicals leached will be negligible and easily flushed away.
I wouldn't use siliconized caulk, even stuff designed for bathroom use as it's not designed for constant exposure to water. It'll probably fail before too long, and you're right back at square one.

Thanks all! Much appreciated

Sent from my SM-G965U using Tapatalk