FlytrapCare Carnivorous Plant Forums

Sponsored by FlytrapStore.com

Have excess seed? Share it with other members here.

Moderator: Matt

By StaatS+17+
Posts:  211
Joined:  Wed Feb 12, 2020 4:26 am
#350641
I would like to do 500ppm solution for Drosera 'Dreamsicle'. Do I need to use Isopropyl Alcohol to help dissolve GA3 in water when mixing .05g for 24 ounces of water?

Thank you my people!

StaatS+17+
User avatar
By nimbulan
Location: 
Posts:  2398
Joined:  Fri Feb 28, 2014 9:03 pm
#350648
That ratio will give you a concentration of about 71 ppm. You'll want about 3.4 ounces of water to make a 500 ppm solution with 50mg of GA3. If you can measure in metric it's much easier (1mg per 1ml of water = 1000 ppm.)

And no, isopropanol will not dissolve GA3. You need to use ethanol, though I typically don't bother and just dissolve it straight in water. It takes a while, but it works.
User avatar
By nimbulan
Location: 
Posts:  2398
Joined:  Fri Feb 28, 2014 9:03 pm
#350755
I do not personally have any experience using GA3 with temperate species, but 24 hours is a pretty typical treatment length.
By Copper2
#350927
I doubt you have real GA3. Where’d you buy it?
By Copper2
#350963
I have my doubts about stuff on Amazon. Lab companies like phytotech have the real stuff

Anyone find anything exceptional/underwhelming or […]

Greetings fellow enthusiasts! I've been intrigued […]

Sure, the more the merrier! Just remember to add t[…]

Ah! If possible, then, could I add the mixed dros[…]

Oddly shaped Sarr

Hey all, a couple of pitchers came up with corkscr[…]

May 2024 Photo Contest - In the Bog

Here’s my big! Established in late 2021 Fi[…]

Does this Rooting hormone work for Byblis?

I’ve grown Byblis for a while but never trie[…]

That looks something like mineral burn. What subst[…]

Support the community - Shop at FlytrapStore.com!