FlytrapCare Carnivorous Plant Forums

Sponsored by FlytrapStore.com

Discuss Nepenthes plant care here

Moderator: Matt

By Sundews69
Location: 
Posts:  1013
Joined:  Fri Dec 03, 2021 5:57 pm
#410490
specialkayme wrote: Tue May 10, 2022 12:07 am
Sundews69 wrote: Sun May 08, 2022 9:47 pm What do you mean by this:
specialkayme wrote: Sun May 08, 2022 3:59 pm I know some that use those small dollar ultrasonic disks that float in a small tupperware of water.
These: https://www.amazon.com/Atomizing-Transd ... 5286&psc=1
Do I just set those in a small body of water and it makes mist? I'm clueless cause I've never heard of these.
By Sundews69
Location: 
Posts:  1013
Joined:  Fri Dec 03, 2021 5:57 pm
#411129
So I got the heater and hooked it up to the inkbird. Do you have a problem with high humidity causing the heater to malfunction or break? Also, when I have it in the tank and the heater eventually turns off, it never turns back on when the temps get to low. Is this from the heater overheating?
User avatar
By specialkayme
Location: 
Posts:  226
Joined:  Tue Apr 13, 2021 11:02 am
#411208
Sundews69 wrote: Mon May 16, 2022 2:33 am
specialkayme wrote: Mon May 16, 2022 2:31 am What heater are you using?
The one you linked.
I liked two. Assuming you're talking about the desk heater (https://www.amazon.com/andily-Heater-El ... s9dHJ1ZQ==) and not the ceramic heater (https://www.amazon.com/Simple-Deluxe-In ... C80&sr=8-6), I've used an earlier model of the desk heater in a moderately high humidity environment for two and a half years without any issue. Not all of them are made the same though.

The inkbird has a setting to delay re-cycling of the heating element. Quickly recycling a heating element is a fast way to burn the element out, so it prevents unnecessary wear on the element. It may be preventing the heater from turning on quick enough. You can look at the manual for the inkbird and mess with the settings if you want. Or maybe the desk heater is overheating. There is no way for me to know. Although I've never had my model overheat, and I had it trapped in a small chest freezer running for hours to get the box up over 100 degrees F without any issue, so I think overheating is unlikely (although for safety reasons I don't suggest doing this).
By Sundews69
Location: 
Posts:  1013
Joined:  Fri Dec 03, 2021 5:57 pm
#411353
Ok, would you recommend that I get the heat lamp or keep the heater? I also contacted the company and they said "it is not suitable for professional aquarium equipment". Now I don't know what to do. What are your thoughts? It's not necessarily professional equipment, but still.
User avatar
By specialkayme
Location: 
Posts:  226
Joined:  Tue Apr 13, 2021 11:02 am
#411364
You also aren't using it in an aquarium.

If it isn't working for you, or you don't feel comfortable with it, don't use it. Go to a pet store and talk to a rep about getting a terrarium heater and see what they suggest.

SASE put in mailbox!

What's the difference?

Just an update as of 6/28. Not the greatest germin[…]

The only precautions I take is I try to make sure […]

Neat looking trap

I haven’t had any false vivipary or double t[…]

JohnW Grow List

Carnivero had clone 3 listed as female on their sa[…]

0988 expired and canceled

Request has expired and been canceled. Seeds retur[…]

0984 expired and canceled

Request has expired and been canceled. Seeds retur[…]

Possible hybrid?

Hey everyone, Is D. spatulata x natalensis a poss[…]

Support the community - Shop at FlytrapStore.com!