FlytrapCare Carnivorous Plant Forums

Sponsored by FlytrapStore.com

Discuss water requirements, "soil" (growing media) and suitable planting containers

Moderator: Matt

By steve booth
Posts:  812
Joined:  Mon Jul 18, 2011 11:15 am
#309193
I grow mine in PH 4 -5.5 but it does go higher occasionally for a few months, the ideal level quoted in wikiHow is 4.9 -5.3.
Cheers
Steve
By Huntsmanshorn
Posts:  574
Joined:  Wed Sep 03, 2014 6:32 am
#309203
Sorry Jonathan_, bad post placement on my part! My post wasn't directed at you at all but I understand your confusion. I was using the idea that you can grow a vft in quartz sand to help support the notion that perhaps the need for a fairly acid media is not entirely correct, as some people had already suggested in earlier posts in the thread.
By Dan Birch
Posts:  2
Joined:  Fri Oct 19, 2018 3:06 pm
#362884
This post can be deleted. The answer to ph levels was posted below.
Last edited by Dan Birch on Fri Sep 04, 2020 2:41 pm, edited 1 time in total.
By RobieOsborne
Posts:  10
Joined:  Mon Aug 24, 2020 12:24 am
#364229
@steve booth,
steve booth wrote:I grow mine in PH 4 -5.5 but it does go higher occasionally for a few months, the ideal level quoted in wikiHow is 4.9 -5.3.
Cheers
Steve
how do you keep your PH between 4-5.5? i just bought a soil ph meter and its reading 7 for all my plants :/ I also have a separate ph reader for the tray water and thats been reading as high unless i put fresh distilled water in it (which I seem to be doing every day now) to drop it down to 5.8ish
By steve booth
Posts:  812
Joined:  Mon Jul 18, 2011 11:15 am
#364336
Hi Robbie
I grow the majority of my plants in reasonably high mass bogs outside, so it is a lot easier than in pots. I test in April and add sulphur chips at about an ounce per sq yard to lower the PH per 1 full point. I also add pine chippings and dig them in the top as a dressing, this also adds long term acidity and tannins.
Dont expect the PH to drop straight away as it needs bacteria to work on the sulphur which only work in the warmer weather and dont add too much sulphur as it can go too low!!

Cheers
Steve
Matt, RobieOsborne liked this
By Dan Birch
Posts:  2
Joined:  Fri Oct 19, 2018 3:06 pm
#364481
The answer, at The Green Swamp, is 2.4-2.7 ph for VFT’s. Sarracenia’s were around 3.8.
Matt liked this
By RobieOsborne
Posts:  10
Joined:  Mon Aug 24, 2020 12:24 am
#365009
steve booth wrote: Wed Sep 02, 2020 1:48 pm Hi Robbie
I grow the majority of my plants in reasonably high mass bogs outside, so it is a lot easier than in pots. I test in April and add sulphur chips at about an ounce per sq yard to lower the PH per 1 full point. I also add pine chippings and dig them in the top as a dressing, this also adds long term acidity and tannins.
Dont expect the PH to drop straight away as it needs bacteria to work on the sulphur which only work in the warmer weather and dont add too much sulphur as it can go too low!!

Cheers
Steve
Thank you for your reply steve! I'm having trouble finding sulphur chips/pine chippings that explicitly say theyre safe for carnivorous plants (I've seen some with additives and it's got me nervous about buying this stuff blindly). Can you message me the sulphur chips and pine chippings you use?

Please and thank you :)
By steve booth
Posts:  812
Joined:  Mon Jul 18, 2011 11:15 am
#365145
Hi Robbie

The suplhur chips are just 'standard elemental suphur as per this sort of purchase https://www.amazon.co.uk/Elixir-Gardens ... 0383&psc=1

Over here we have a number of products that are pure pine bark, retrieved from furniture and woodworking jobs, you can get small 100L bags for mulching that are labelled as pure pine bark or as per this https://www.cpa-horticulture.co.uk/bark ... b953e39a89

Cheers
Steve
RobieOsborne liked this
By uxleumas
Posts:  379
Joined:  Thu May 07, 2020 5:30 pm
#365945
steve booth wrote: Wed Sep 02, 2020 1:48 pm Hi Robbie
I grow the majority of my plants in reasonably high mass bogs outside, so it is a lot easier than in pots. I test in April and add sulphur chips at about an ounce per sq yard to lower the PH per 1 full point. I also add pine chippings and dig them in the top as a dressing, this also adds long term acidity and tannins.
Dont expect the PH to drop straight away as it needs bacteria to work on the sulphur which only work in the warmer weather and dont add too much sulphur as it can go too low!!

Cheers
Steve
does regular sulfur work? does regular sulfur also act as a fungicide?
By steve booth
Posts:  812
Joined:  Mon Jul 18, 2011 11:15 am
#366292
Hi Robbie - apologies for the delay, Ive been away.
Rather than me waffling about how it works have a look at the link below which spells it out quite nicely
https://www.canr.msu.edu/uploads/files/ ... Sulfur.pdf

And yes it does work as a fungicide but fairly locally, if you want a more general attack then break it into powder and spread in problem areas.
Cheers
Steve
A CP dream come true

He messaged me and offered me one also, but I had […]

Postage received, address received. I'll get thing[…]

good morning

Welcome to the forums! I saw that you were interes[…]

I am looking for cephalotus

if you have cultivars of cephalotus to sell write […]

LL conditions for HL seedlings

I've seen the advice that all nepenthes seeds like[…]

Does anyone know of a VFT seed company called egr[…]

Great info! Thanks everyone for the help and guida[…]

I am also selling Drosera Adelae https://i.imgur.c[…]

Support the community - Shop at FlytrapStore.com!