- Thu Oct 20, 2016 6:10 pm
#277527
Screenshot_2016-11-06-14-29-17.png (2.01 MiB) Viewed 1849 times
Screenshot_2016-11-06-14-29-56.png (218.5 KiB) Viewed 1849 times
20161106_122619-480x853.jpg (53.27 KiB) Viewed 1852 times
20161106_122512-320x180.jpg (7.92 KiB) Viewed 1852 times
20161020_185159.jpg (593.52 KiB) Viewed 1964 times
20161020_185143.jpg (755.02 KiB) Viewed 1964 times
030144_a.jpg (4.38 KiB) Viewed 1964 times
Hi
I was after a way of draining my two 3 ft x 10 ft home made water tray so I could add fresh water.
So came up with the following items
1 Basin waste trap with no slot
90 degree plumbers bend 1-1/2". length of pvc waste pipe ,
1 end blanking cap
Which I converted to accommodate a water butt tap
reason why i added a water butt tap. which was for a safety back up so if plug was knocked or plug deteriorated the water would not drain
My greenhouse is polycarbonate so I was able to run pipe to out side of the greenhouse by cutting a circle out of the polycarbonate sheet
I was after a way of draining my two 3 ft x 10 ft home made water tray so I could add fresh water.
So came up with the following items
1 Basin waste trap with no slot
90 degree plumbers bend 1-1/2". length of pvc waste pipe ,
1 end blanking cap
Which I converted to accommodate a water butt tap
reason why i added a water butt tap. which was for a safety back up so if plug was knocked or plug deteriorated the water would not drain
My greenhouse is polycarbonate so I was able to run pipe to out side of the greenhouse by cutting a circle out of the polycarbonate sheet
Attachments:
neville3970 liked this
- By LowieSomers
- By Dejavert
- By Adrien
- By Camden
- By stephenboss2000
- By Hedonista